20230530
1.Optimization and correction
　- Improved headset microphone functionality
　- Fixed the disconnection problem of Elite2
　- Fix the problem that the buttons of Elite2 do not respond
2. Function update
　- PS4 mode can connect to Android phone by wire
　- Elite2 firmware V5.17.3202.0 supports rear paddles

20220113
1. Support the firmware version 5.11.3118.0 of Elite2/Xbox series X/Xbox one S controller
(wired and wireless use)
2. Support vibration strength adjustment.
Default is the strongest vibration, the setting would be automatically saved.
Turbo + Dpad Left = + vibration strength
Turbo + Dpad Right = - vibration strength

20211008
1. Fix drive problem when use in NS mode on Steam
2. Fix vibration abnormality when use in NS mode to play It Takes Two on Steam
3. Adjust the 3DVR calibration value to fix auto moving problem when use in NS mode to play It Takes Two on Steam

20210305
1. Lower down LED brightness

20210106
1. Controller compatibility update: Support XBOX Series X/S controller
2. New touchpad simulation
　2.1 Press Touchpad simulate button for less than 0.4 sec = press Touchpad simulate button + R3 simultaneously
　2.2 Press Touchpad simulate button for more than 0.4 sec = current touchpad simulation method( use with R3)
3. Support to use View for touchpad simulation
　3.1 Touchpad simulate button + Y : both View/Touchpad simulate button are available for touchpad simulation (at this point, View = View + Menu)
　3.2 Touchpad simulate button + A : only Touchpad simulate button is available for touchpad simulation
4. Cancel the mapping that Wireless pairing button = PS
5. Add button hold function: the set buttons are hold down all the time without pressing
　5.1 Digital button: hold down Wireless pairing button, press the digital buttons you want for one time (X,Y,A,B,LB,RB,L3,R3,Dpad), then release Wireless pairing button to finish setting
　5.2 Analog button: hold down Wireless pairing button, press or move the analog button (LT,RT,L3,R3) to any level or direction you want, release Wireless pairing button, finally release the analog button to finish setting
6. Add turbo speed adjustment: the default is 10Hz, can be set as 5Hz / 7.5Hz / 12.5Hz / 15Hz
　6.1 Turbo button + Dpad UP: speed up
　6.2 Turbo button + Dpad DOWN: speed down

20220610
1. Improve the stability of six axis.

20220113
1. Support to play Steam game on PC in NS mode
2. Fix vibration abnormality when playing Steam game in NS mode
3. Support the firmware version 5.11.3118.0 of Xbox one S controller (wired and wireless use)

20201104
1. Add the original touchpad emulation back(setting can be automatically memorized)
1.1 View +L3: original touchpad emulation, View = TP Key (default)
1.2 View +R3: new touchpad emulation (for Ghost of Tsushima )

20200805
1. Support touch pad emulation function on Ghost of Tsushima
--Press emulation:
- VIEW + turn left 3DVR and press R3 / turn right 3DVR and press R3/ press R3
--Touch emulation:
- VIEW + turn the right 3DVR (up/down/left/right), and release VIEW

20200102
1. Fix Xbox Wireless Controller unable to use problem after Xbox Wireless Controller’s latest firmware update
2. Improve Bluetooth wireless connection stability on Switch
3. Turn on and off dead zone of 3DVR on PS4
On: Brook-Key+Y
Off: Brook-Key+A


20190815
1. Support Turbo and Remap function for wired use in PC mode
2. Fix disconnection problem upon charging when wireless use in PC mode
3. Support iOS13 device for wireless use in PS4 mode
20190311
1. Fix motion sensor delay problem and vibration abnormality problem in Splatoon 2.
2. Fix reconnection problem: cannot reconnect back to Switch after switching back to Switch mode from PS4 mode
3. [New pairing method on Switch]
step 1. Switch to Switch mode
step 2.On Switch, go to System Setting → Controllers and Sensors, and turn on Pro Controller Wired Communication
step 3. Connect the X One Adapter to Switch dock for automatic pairing, disconnect the usb cable while it can be used
step 4.Short press Brook Key, Brook Key LED flashes blue, pairing completes when it turns to stable blue

20181113
1. Fix vibration abnormality in Gran Turismo Sport PS4)
2. Fix disconnection problem while switching to movie mode in Red Dead 2 (PS4)

**When the Brook Key LED starts to flash, long press the combo keys( for about 10 seconds ) until the LED goes off to switch to according mode.

20180601
*****Download the file to execute the update*****
1. Improve controller vibration reaction when playing on Switch
2. Headset compatibility improvement
2.1 Support PS4 mono headset
2.2 Improve noise problem with some headset
2.3 Support to connect headset to XBox One Chatpad to use
3. Fix random invalidity problem of Xbox Key when pressing Xbox Key on Xbox One S controller
4. New way to use X One Adapter
A. Wireless use on PC
B. Wired use on PC and Xbox One
Refer to the video link to see how to operate: https://www.youtube.com/watch?v=0YcCAh-gkMc

20180314
1. Fix pairing problem for Switch V5.0.0
2. Fix remap problem with the 2 buttons RT/LT

20180202
1. New button configuration in PS4 mode
1-1) Brook Key = Share
1-2) View = Touch Key
2. Fix connection problem in Xbox one mode
3. Fix problems in Switch mode
3-1) Improve vibration problem
3-2) Improve disconnection problem in Monster Hunter XX
3-3) Improve auto-popping up alarm window in Splatoon2
4. Adjust analog stick input sensitivity
5. Fix controller power display problem on PS4

20171218
1. Fix audio abnormality in PS4 mode.
2. Support vibration ON/OFF setting in Switch mode
Vibration ON：Brook Key + X
Vibration OFF：Brook Key + B
Note: The default vibration is on. When pressing the combo keys, the LED will go off, and when releasing
the combo keys, the LED will be on.