Brook Super Converter series make new controllers compatible with retro consoles.

This not only saves your money but also means that you can use the controllers you have grown accustomed to. Installation and use of the PS3/PS4 to NEOGEO mini controller Adapter is effortless.

Firmware Updatable

X-input support

Vibartion Support (X-input mode only)

Auto-register controllers

Full compliance with environmental standards.

1. NEOGEO mini → PC (X-input)

Press the direction key to the DOWN and START (Press the direction key to the down and OPTIONS buttons for PS4 gamepad) buttons at 3 seconds.

You can see the LED will flash once.

By pressing combo keys to switch between Type A, Type B and Type C.

Type-A : Hold on Fn(PS) + □ & pro vides the Turbo & Remap button configuration function, the default is in this Type as Mini Pad mode when mini converter is power on.

Type-B : Hold on Fn(PS) + X to set Mini Pad mode.

Type-C : Hold on Fn(PS) + △ to set Arcade Stick mode.

※The following uses NEOGEO mini control code to do function description.

Procedure for assigning Turbo button

Step 1.

Press the PS and SELECT buttons (Press the PS and SHARE buttons for PS4 Gamepad) at the same time. The converter’s LED will switch from blue to red to indicate that you enter the settings mode.

Step 2.

Press the SELECT buttons (Press the SHARE and OPTIONS buttons for PS4 Gamepad) at the same time to clear the current setting.

Step 3.

Press the PS button to exit the setting mode. The Converter’s LED will switch from to red to blue to indicate that you exit the settings mode.

Step 4.

This step can be used to check if the button is set to the brust button.

1.     Press the direction key to the right, you can query ○, △, □, X key, in order to display PlayerLED 1~4

2.     Press the direction key to the up, you can query the R2, R1, L1, and L2 keys, and display them in sequence for PlayerLED 1~4.

3.     Press the direction key to the down, you can query the R3 and L3 keys, which are displayed as PlayerLED 1,4.

Step 5.

Press the PS button to exit the setting mode. The Converter’s LED will switch from to red to blue to indicate that you exit the settings mode.

Procedure for customizing buttons.

Step 1.

Press the PS and START buttons (Press the PS and OPTIONS buttons for PS4 Gamepad) at the same time. The converter’s LED will switch from blue to red to indicate that you enter the settings mode.

Step 2.

Transfer a function form one button to another.

(Example: You want to use □ to do what ○ does now.)

1.Press the ○ button.

2.Press the SELECT button( Press and hold the SHARE button for PS4 Gamepad) then press the □ button.

3.Press the Start Button (Press the OPTIONS button for PS4 Gamepad) to complete the setting

Transfer a function form one button to multiple buttons.

(Example: You want to use X, □ to do what ○ does now.)

1.Press the ○ button.

2.Press the SELECT button (Press and hold the SHARE button for PS4 Gamepad) then press X and □ button in one by one. (any sequence will do)

3.Press the Start Button (Press the OPTIONS button for PS4 Gamepad) to compelte the settion.

Step3.

This step can be used to check if the button is set to the brust button.

1.Press the direction key to the right, you can query ○, △, □, X key, in order to display PlayerLED 1~4

2.Press the direction key to the up, you can query the R2, R1, L1, and L2 keys, and display them in sequence for PlayerLED 1~4.

3.Press the direction key to the down, you can query the R3 and L3 keys, which are displayed as PlayerLED 1,4.

Step4.

Press the PS button to exit the setting mode. The Converter’s LED will switch from to red to blue to indicate that you exit the settings mode.

Disclaimer 

Each Brook Controller Adapter can only handle one PS3/PS4 controller at a time.

PS3/PS4 controllers connect to the Controller Adapter automatically, but must be connected with a USB cable at first time use for the purpose of registering the controller.