-------------V1.1.1.5_20240509 -----------
1. Controller Compatibility Update
----8BitDo NEOGEO x SNK Wireless Controller(2.4G Dongle and wired used)
----SN30 Pro USB Gamepad
----8BitDo Ultimate Bluetooth Controller (2.4G Dongle)
----Razer Kitsune (P5 Mode)
Select + Left = L-Stick
Select + Up = D-Pad
Select + Right = R-Stick
----HORI Fighting Stick Alpha for PlayStation®5, PlayStation®4, PC SPF-013A (P5+P4 Mode)
Select + Left = L-Stick
Select + Up = D-Pad
Select + Right = R-Stick

Standard_V1.1.1.0_2023-12-07-----------
Tournament_V1.1.1.0_2023-12-07-----------
1. Optimize connection stability.
2. compatibility added:
--a. 8BitDo SNK Controller
--b. EXAPRIZE SANWA Arcade Boxes
--c. Razer Kitsune Arcade Boxes

Standard_V1.1.0.1_2023-08-22 -----------
1. Optimize connection stability

TE_V1.1.0.1_2023-08-01 -----------
1. Optimize performance and connection stability

20230720
1. Decreased Latency:
- The new firmware for Wingman FGC converter effectively reduces the latency between the controller and PS5.
- The Tournament version achieves an impressively low 1.3ms response time.

2. Improved Left Analog Stick Input:
- The updated firmware addresses the input lag issue with the left analog stick on the controller.
- The left analog stick's response time is now on par with the other buttons, providing a more consistent gaming experience.

3. LED Indicators:
- The Tournament version has a red LED indicator, while the Standard version has a blue LED indicator.

20230609
1. Optimized system stability

20230526
1. Added tournament mode
2. Support to backup and restore Turbo & Remap & MARCO on PC
3. Fixed the MARCO trigger button error
4. Added two sets of MARCO stop functions
　　A. Start+Select+L-3DVR down
　　B. Start+Select+R-3DVR down

V1.5g 2024/03/22---------------
TE V2.9e 2024/03/22---------------
1. Controller compatibility update: add to support
--A. Razer Kitsune PS5 Mode
----Select + Left = L-Stick
----Select + Up = D-Pad
----Select + Right = R-Stick
--B. 8BitDo Ultimate Bluetooth Controller (BT and 2.4G Dongle) mode.
--C. BitDo NEOGEO x SNK Wireless Controller (2.4G Dongle and wired used) mode.
--D. Sony Access™ Controller (wired used and support profiles switching)
--E. EXAPRIZE USB STICK SANWA EDITION [PS3]
--F. SN30 Pro USB Gamepad
--G. ZUIKI Densha de GO Controller (press the Capture button to switch to Densha de GO mode after connecting)

2. Function update:
--Analog Zoom Enable Select+Start+Square
--Analog Zoom Off Select+Start+Circle


20230504
1. Controller compatibility update: add to support
　 A. Wii U PRO Bluetooth
　 B. PS5 DualSense Edge
2. Optimization and correction
　 A. Optimize the functions on Steamdeck, and fix the problem that the game console does not respond after waking up after hibernation
　 B. Optimize the vibration intensity of the PS5 controller
　 C. Fix the problem that the RetroBit 2.4G controller does not respond
　 D. Fixed the LB RB button swap problem of Razer Atrox fight stick
3. Function update: Touch simulation function can be turned off
　 A. (PS+Triangle=close simulation), Select=Share, Start=Option
　 B. (PS+Cross=open simulation), Select=Touch simulation, Select+Start=Share

20230330
1. Add Tournament Mode

20221122
1. Controller compatibility update: add to support
Brook Vivid controller
2. Fix L2/R2 input abnormality when using Switch Pro controller on PS3
3. Automatically save the setting of turning on/off 3DVR magnification
4. Support remained power display on consoles with using the following official controllers
Console support: PS3/ NS
Controller support: PS3, PS4, PS5, NS Pro, XBOX360 wireless controller

20220412
1. Controller compatibility update: add to support
　 PDP faceoff Deluxe+
　 Victrix Gambit World's Fastest XBOX controller
　 8BitDoSN30pro
　 Mad Catz PS3 Street Fighter IV Fight Stick
　 Egret II mini Controller & Arcade
　 8bitdo PRO2

20211007
1. Controller compatibility update: add to support
　　 NACON DAIJA ARCADE STICK
　　PowerA Enhanced Wired Controller for XBOX Series X
　　Hori Pokemon Controller (Select+Start=PS)
2. Enable/ disable 3DVR magnification
　　Select+Square: 3DVR magnification on
　　Select+Circle: 3DVR magnification off
3. Adjust the support of SNK NeoGeo Arcade Stick Pro (in mode 3)
　　select+Left=L Stick
　　select+Up=D-Pad
　　select+Right=R Stick
　　select+Start=PS
　　select+L1=L3
　　select+L2=R3
4. Fix Turbo/Remap abnormality when using PS3 controller
5. Fix motion control abnormality when using PS3 controller on PS3
6. Fix motion control abnormality when using Switch Pro controller

20210428
1. Controller compatibility update: add to support
　　HORI Fighting Stick alpha Designed for XBOX Series X|S
　　HORI FLEX Controller

20210305
1. Fix no vibration problem with using official wired Xbox360 controller
2. Fix no reaction problem when pressing Capture as TouchPad-Key on Switch Pro controller
3. Controller compatibility update: add to support
Astro city mini arcade stick
MEGA Drive mini controller

20210119
1. Fix 8 minutes timeout problem with playing PS4 games on PS5
2. Support PS3 console
3. Controller compatibility update: add to support
PS5 DualSence controller (wired use and wireless use)
PS4 Dualshock 4 controller (wired use and wireless use)
PS3 Dualshock 3 controller (wired use and wireless use)
Xbox Series X/S controller (wired use)
Switch Pro controller (wired use and wireless use)
SEGA ASTRO CITY mini Controller (wired use)

20201104
1. Add the original touchpad emulation back(setting can be automatically memorized)
1.1 View +L3: original touchpad emulation, View = TP Key (default)
1.2 View +R3: new touchpad emulation (for Ghost of Tsushima )

20200805
1. Improve wireless pairing stability of XBOX Elite2 controller
2. Support touch pad emulation function on Ghost of Tsushima
--Press emulation:
- VIEW + turn left 3DVR and press R3 / turn right 3DVR and press R3/ press R3
--Touch emulation:
- VIEW + turn the right 3DVR (up/down/left/right), and release VIEW

20240307
V1.2.1.0 & V1.1.6.2 TE
1. Controller compatibility update: add to support
A. Razer Kitsune (PS5 Mode)
Select + Left = L-Stick
Select + Up = D-Pad
Select + Right = R-Stick
B. 8BitDo Ultimate Bluetooth Controller (BT and 2.4G Dongle) mode.
C. 8BitDo NEOGEO x SNK Wireless Controller (2.4G Dongle and wired used) mode.
D. Sony Access™ Controller (wired used and support profiles switching)
E. EXAPRIZE USB STICK SANWA EDITION [PS3]
F. SN30 Pro+ (BT) mode.
G. SN30 Pro USB Gamepad
H. ZUIKI Densha de GO Controller (press the Capture button to switch to Densha de GO mode after
connecting)

2. Function update:
A. Support Manual Mode Switching and Save
PS+Left=PS4 Mode
PS+Up=NS Mode
PS+Right=PS3 Mode
PS+Down=Auto Mode (Steamdeck)
B. Vibration switch setting
PS(XBOX) + Square(X)= Enable Rumble Motor
PS(XBOX) + Circle(B)= Disable Rumble Motor

2023-09-06
V1.2.0.2 & V1.1.5.4 TE
1. Compatibility added:
--A. VR2 Dual Sense Controller
--B. SWITCH JoyCon (see 2. JoyCon connection instructions for connection method)
--C. HORI Hatsune Miku: Project DIVA Arcade：PS4 version (PS4-161) and Switch version (NSW-230)
--D. PEGAGAME Hatsune Miku: Project DIVA Arcade Controller：PS4 version (P4016) and Switch version (SW056)
--E. NEOGEO Arcade Stick Pro
2. JoyCon Connection Instructions
--A. Press and hold the LED buttons on both sides of XE2, the lights will flash quickly to enter pairing mode.
--B. Press the pairing button on one of the JoyCon(L/R) to enter the pairing mode
--C. After the pairing is successful, press and hold the LED buttons on both sides of the XE2 to disconnect the paired JoyCon
--D. Repeat steps A. to C. for the other JoyCon
--E. Wake up two JoyCons (L/R) respectively and let them reconnect to XE2
--F. The reconnection step is not smooth. Before the JoyCon connection indicator light goes out, press the JoyCon pairing button to sleep, then wake up the JoyCon and try to reconnect.
--G. To perform JoyCon 3DVR center correction, press ⊕ +D-pad L and click twice to perform correction.
--H. Switch left somatosensory = Home + L3 (two clicks in a row)
--I. Switch right somatosensory = Capture + R3 (two clicks in a row)

20230330
1. Added tournament mode

20230313
1. Improve connection stability
2. Controller compatibility update: add to support
PS5 Dual Sense Edge
3. Support MARCO Function
4. Support to backup and restore Turbo & Remap & MARCO on PC

----------V4.1.0 M1-ONLINE-2024-02-07--------
1. Optimization of connectivity.
2. Turbo function changed to 30 Hit/Sec

----------V4.0.2-ONLINE-2023-12-11--------
1. Optimization of connectivity.

----------V4.0.1-ONLINE-2023-11-10--------
1. Memorize manual switching of console mode and SOCD mode
2. Change the SOCD mode switching method:
Press and hold the following D-Pad and plug in a game console to switch SOCD mode:
← = Mode1 Up priority
←+→=null　→+←=null　↑+↓=↑　↓+↑=↑

↑ = Mode2 Capcom Tournament Edition
←+→=null　→+←=null　↑+↓=null　↓+↑=null

↓ = Mode3 Second-Input priority
←+→=→　→+←=←　↑+↓=↓　↓+↑=↑

→ = Mode4 Bypass
←+→=←+→　→+←=→+←　↑+↓=↑+↓　↓+↑=↓+↑　

20230712
1. Fixed L, R-stick, and D-Pad mode switching problems.

20230630
Function update:
1. Added the device mode will be saved automatically when uses manual mode.
2. Added Auto Detect Console Mode
- Hold down Option (menu) button and then plug USB cable to PC / console.

20230602
First edition

【Due to different hardware versions, there are variations in firmware versions, and the system will automatically identify the appropriate update version.】

----------V4.1.0 M1-ONLINE-2024-02-07--------
1. Optimization of connectivity.
2. Turbo function changed to 30 Hit/Sec

----------V4.0.2-ONLINE-2023-12-11--------
1. Optimization of connectivity.

----------V4.0.1-ONLINE-2023-11-10--------
1. Memorize manual switching of console mode and SOCD mode
2. Change the SOCD mode switching method:
Press and hold the following D-Pad and plug in a game console to switch SOCD mode:
← = Mode1 Up priority
←+→=null　→+←=null　↑+↓=↑　↓+↑=↑

↑ = Mode2 Capcom Tournament Edition
←+→=null　→+←=null　↑+↓=null　↓+↑=null

↓ = Mode3 Second-Input priority
←+→=→　→+←=←　↑+↓=↓　↓+↑=↑

→ = Mode4 Bypass
←+→=←+→　→+←=→+←　↑+↓=↑+↓　↓+↑=↓+↑　

----------V3.9-ONLINE-20230710--------
M1 (V3.9) :
1. Fixed L, R-stick, and D-Pad mode switching problems.

----------V3.8-ONLINE-20230626--------
M1 (V3.8)
1. Added the device mode will be saved automatically when uses manual mode.
2. Added Auto Detect Console Mode
- Hold down Option (menu) button and then plug USB cable to PC / console.

----------V3.7-ONLINE-20230330--------
1. Add Capcom Tournament Mode

----------V3.6-ONLINE-20230217--------
1. Add to support SOCD when it’s switched from DP mode to LS/RS mode.

----------V3.5-ONLINE-20230109--------
1. Improve the stability when doing firmware update on Windows 11 PC

----------V3.4-ONLINE-20220901--------
1. Add to support SHARE key in Xbox one mode when using on XSX
(correspond to TPKEY on J4)

----------V3.0-ONLINE-20210809--------
1. Support Brook UFB-UP5
The way to connect the pin for SOCD has changed as the followings
Open J2_1、J2_2: (Mode 1)Current SOCD
Short J2_1、J2_2: (Mode 2)New SOCD, second-input priority. ie: (← + → = →)，(→ + ← = ←)

----------V3.0-ONLINE-20210809--------
1. Support Brook UFB-UP5
The way to connect the pin for SOCD has changed as the followings
Open J2_1、J2_2: (Mode 1)Current SOCD
Short J2_1、J2_2: (Mode 2)New SOCD, second-input priority. ie: (← + → = →)，(→ + ← = ←)

1. Fix touch pad simulation abnormality when playing PS4 game Samurai Shodown in practice mode
2. Fix SOCD input abnormality

----------V2.8-ONLINE-20191202--------
1. Support NEOGEO Arcade Stick Pro: Hold down 3K(R2) and plug it to NEOGEO Arcade Stick Pro to use

----------V2.7-ONLINE-20191017--------
1. Support SEGA Mega Drive mini: Hold down □╳ and plug it to SEGA Mega Drive mini to use

----------V2.6-ONLINE-20181225--------
1. Support PS Classic: Hold down □△ and plug it to PS Classic to use

----------V2.55-ONLINE-20181001--------
1. Support to play games on NeoGeoMini.
Hold down R2 and plug UFB to NeoGeoMini to play.
There are 5 mapping layouts. Switch between different layouts when UFB is plugged to NeoGeoMini
The layout can be memorized even if UFB is unplugged.
(1)TYPE A: PS +△ (default)
(2)TYPE B: PS +○
(3)TYPE C: PS +R1
(4)TYPE D: PS +╳
(5)TYPE E: PS +○+R2
Refer to the product introduction page for the mapping chart.

----------V2.4-ONLINE-20180810--------
1. Fix Xbox key delay problem in Xbox one mode

----------V2.3-ONLINE-20180612--------
1. Input sensitivity improvement

----------V2.2-ONLINE-20180309--------
1. Fix 8 minutes time out problem for PS4 V5.5
2. Other functions optimization

----------V2.1-ONLINE-201801--------
1. Fix the auto-popping up controller update message in Xbox one.

----------V2.0-ONLINE-201707--------
Manual Mode Support Nintendo Switch
step 1 : Press button:
1P for PS3
2P for PS4
3P for Xbox 360
4P for Xbox One
1K for Wii U - Pokken Tournament and Nintendo Switch
2K for Original Xbox

step 2 : While pressing, connect fightstick to corresponding console
**Refer to UFB introduction page for button configuration


----------V1.9-ONLINE-201704--------
Open J2_4、J2_5: Current SOCD output
Short J2_4、J2_5: New SOCD output, second command covers first command. ie: (← + → = →)，(→ + ← = ←)

----------V1.8-ONLINE-201701--------
Firmware optimized.
-------------V1.7-20160823-----------
1. add support to manually select PS2 Game on PS3 host - press and hold 1P to manually select PS3 mode when entering the game.
2. add support manually select Xbox original host - press and hold 2K and then plug in the usb.

Press and hold the button to connect to computer or console.
1P: PS3
2P: PS4
3P: X360
4P: XB1
1K: Wii U - Pokken Tournament
2k: Xbox original

-------------V1.6-20160722-----------
1. Fix 8 minutes time out problem for PS4 V3.55
V1.5.1-20160617
1. Support Wii U- Pokken Tournament
A. Press button
1P: PS3
2P: PS4
3P: X360
4P: XB1
1K: Wii U - Pokken Tournament
B. While pressing, connect fightstick to PC

2. Improve buttons reaction time in PS3/PS4 mode

3. Fix manual combo keys setting for DP/LS/RS mode(Press combo keys for 3 seconds to switch between DP/LS/RS modes, for those who don't have LS, RS, DP switch)
Options_key + Dpad_up = DP
Options_key + Dpad_left = LS
Options_key + Dpad_right = RS

-------------V1.5-20160531-----------
1. Support Wii U- Pokken Tournament
A. Press button
1P: PS3
2P: PS4
3P: X360
4P: XB1
1K: Wii U - Pokken Tournament
B. While pressing, connect fightstick to PC

2. Improve buttons reaction time in PS3/PS4 mode

3. Manual combo keys setting for DP/LS/RS mode(For those who don't have LS, RS, DP switch)
Options_key + Dpad_up = DP
Options_key + Dpad_left = LS
Options_key + Dpad_right = RS

-------------V1.4-20160406-----------
(1)Fix 8 minutes time out problem for PS4 V3.50
(2) Improve reaction time in PS3 mode

-------------V1.3-20160215-----------
(1) Fixed SOCD Cleaner output
(2) TP key outputs SELECT function on PS3/360/XB1

-------------V1.2-20160205-----------
*Add PS4 touch simulate function
*Add manual detective mode: Press the button then plug USB(1P:PS3,2P:PS4, 3P:X360,4P:XB1) *Adjust SOCD output setting
*Eliminate win 10 system using Xbox one stick timeout issue

！！！This firmware version is suitable for Model No. 【A-C21035-210721-V1.0(NEW)】！！！
Please check the back of the UFB.

----------V3.0-ONLINE-20210809--------
1. Support Brook UFB-UP5
The way to connect the pin for SOCD has changed as the followings
Open J2_1、J2_2: (Mode 1)Current SOCD
Short J2_1、J2_2: (Mode 2)New SOCD, second-input priority. ie: (← + → = →)，(→ + ← = ←)

----------V3.0-ONLINE-20210809--------
1. Support Brook UFB-UP5
The way to connect the pin for SOCD has changed as the followings
Open J2_1、J2_2: (Mode 1)Current SOCD
Short J2_1、J2_2: (Mode 2)New SOCD, second-input priority. ie: (← + → = →)，(→ + ← = ←)

1. Fix touch pad simulation abnormality when playing PS4 game Samurai Shodown in practice mode
2. Fix SOCD input abnormality

----------V2.8-ONLINE-20191202--------
1. Support NEOGEO Arcade Stick Pro: Hold down 3K(R2) and plug it to NEOGEO Arcade Stick Pro to use

----------V2.7-ONLINE-20191017--------
1. Support SEGA Mega Drive mini: Hold down □╳ and plug it to SEGA Mega Drive mini to use

----------V2.6-ONLINE-20181225--------
1. Support PS Classic: Hold down □△ and plug it to PS Classic to use

----------V2.55-ONLINE-20181001--------
1. Support to play games on NeoGeoMini.
Hold down R2 and plug UFB to NeoGeoMini to play.
There are 5 mapping layouts. Switch between different layouts when UFB is plugged to NeoGeoMini
The layout can be memorized even if UFB is unplugged.
(1)TYPE A: PS +△ (default)
(2)TYPE B: PS +○
(3)TYPE C: PS +R1
(4)TYPE D: PS +╳
(5)TYPE E: PS +○+R2
Refer to the product introduction page for the mapping chart.

----------V2.4-ONLINE-20180810--------
1. Fix Xbox key delay problem in Xbox one mode

----------V2.3-ONLINE-20180612--------
1. Input sensitivity improvement

----------V2.2-ONLINE-20180309--------
1. Fix 8 minutes time out problem for PS4 V5.5
2. Other functions optimization

----------V2.1-ONLINE-201801--------
1. Fix the auto-popping up controller update message in Xbox one.

----------V2.0-ONLINE-201707--------
Manual Mode Support Nintendo Switch
step 1 : Press button:
1P for PS3
2P for PS4
3P for Xbox 360
4P for Xbox One
1K for Wii U - Pokken Tournament and Nintendo Switch
2K for Original Xbox

step 2 : While pressing, connect fightstick to corresponding console
**Refer to UFB introduction page for button configuration


----------V1.9-ONLINE-201704--------
Open J2_4、J2_5: Current SOCD output
Short J2_4、J2_5: New SOCD output, second command covers first command. ie: (← + → = →)，(→ + ← = ←)

----------V1.8-ONLINE-201701--------
Firmware optimized.

-------------V1.7-20160823-----------
1. add support to manually select PS2 Game on PS3 host - press and hold 1P to manually select PS3 mode when entering the game.
2. add support manually select Xbox original host - press and hold 2K and then plug in the usb.

Press and hold the button to connect to computer or console.
1P: PS3
2P: PS4
3P: X360
4P: XB1
1K: Wii U - Pokken Tournament
2k: Xbox original

-------------V1.6-20160722-----------
1. Fix 8 minutes time out problem for PS4 V3.55
V1.5.1-20160617
1. Support Wii U- Pokken Tournament
A. Press button
1P: PS3
2P: PS4
3P: X360
4P: XB1
1K: Wii U - Pokken Tournament
B. While pressing, connect fightstick to PC

2. Improve buttons reaction time in PS3/PS4 mode

3. Fix manual combo keys setting for DP/LS/RS mode(Press combo keys for 3 seconds to switch between DP/LS/RS modes, for those who don't have LS, RS, DP switch)
Options_key + Dpad_up = DP
Options_key + Dpad_left = LS
Options_key + Dpad_right = RS

-------------V1.5-20160531-----------
1. Support Wii U- Pokken Tournament
A. Press button
1P: PS3
2P: PS4
3P: X360
4P: XB1
1K: Wii U - Pokken Tournament
B. While pressing, connect fightstick to PC

2. Improve buttons reaction time in PS3/PS4 mode

3. Manual combo keys setting for DP/LS/RS mode(For those who don't have LS, RS, DP switch)
Options_key + Dpad_up = DP
Options_key + Dpad_left = LS
Options_key + Dpad_right = RS

-------------V1.4-20160406-----------
(1)Fix 8 minutes time out problem for PS4 V3.50
(2) Improve reaction time in PS3 mode

-------------V1.3-20160215-----------
(1) Fixed SOCD Cleaner output
(2) TP key outputs SELECT function on PS3/360/XB1

-------------V1.2-20160205-----------
*Add PS4 touch simulate function
*Add manual detective mode: Press the button then plug USB(1P:PS3,2P:PS4, 3P:X360,4P:XB1) *Adjust SOCD output setting
*Eliminate win 10 system using Xbox one stick timeout issue

-------------V1.7_2023-11-22-----------
1. New functions in PC wireless X-input mode
Battery display: Press the PS button to display the remaining battery power through the PLAYER LED lights (4 lights are full, 1 light is low)
2. Memorize manual switching of console mode and SOCD mode
3. Change the SOCD mode switching method:
Press and hold the following D-Pad and plug in a game console to switch SOCD mode:
← = Mode1 Up priority
←+→=null　→+←=null　↑+↓=↑　↓+↑=↑

↑ = Mode2 Capcom Tournament Edition
←+→=null　→+←=null　↑+↓=null　↓+↑=null

↓ = Mode3 Second-Input priority
←+→=→　→+←=←　↑+↓=↓　↓+↑=↑

→ = Mode4 Bypass
←+→=←+→　→+←=→+←　↑+↓=↑+↓　↓+↑=↓+↑　


20230609
1. Added wireless X-Input mode, switch button = 3K, BT pairing ID = Wireless Fighter Board
2. Added Capcom Tournament Mode

20200316
1. Add to support Touch Key input in PC mode.
2. Fix the abnormality of continuously pressing Home then unplugging the usb in PC mode

20200305
1. Fix SOCD abnormality problem
2. Fix wireless reconnection abnormality problem

20200207
1. Fix abnormality of LS/DP/RS emulation

20191021
1. Fix wireless connection problem on PC (in PS4 and NS mode)
2. Add PC (XID) mode (wired use only)
step1. Hold down corresponding button
1P=PS3
2P=PS4
1K=NS
2K=PC (XID)
step2. Wired: Use a USB cable to connect to console (PS3/PS4/NS/PC)
Wireless: Press PS Key for wireless connection (PS3/PS4/NS)
3. Add Tournament mode: Turn off the wireless connection function of PS Key，wired use only
step1. Hold down 3P first，and then hold down corresponding button
1P=PS3
2P=PS4
1K=NS
2K=PC (XID)
step2. Use a USB cable to connect to console (PS3/PS4/NS/PC)

-------------V2.1 2023-11-21-----------
1. Memorize manual switching of SOCD mode
2. Change the SOCD mode switching method:
Press and hold the following D-Pad and plug in a game console to switch SOCD mode:
← = Mode1 Up priority
←+→=null　→+←=null　↑+↓=↑　↓+↑=↑

↑ = Mode2 Capcom Tournament Edition
←+→=null　→+←=null　↑+↓=null　↓+↑=null

↓ = Mode3 Second-Input priority
←+→=→　→+←=←　↑+↓=↓　↓+↑=↑

→ = Mode4 Bypass
←+→=←+→　→+←=→+←　↑+↓=↑+↓　↓+↑=↓+↑　

20230330
1. Add Capcom Tournament Mode

20220112
1. Support Brook UFB-UP5

20210119
1. Fix SOCD input bug: Second command covers first command
For example
[← +> → ＝ →]
[→ +> ← ＝ ←]
[↑ +> ↓ ＝ ↓]
[↓ +> ↑ ＝ ↑]
[↙ +> ↗ ＝ ↗]
[↘ +> ↖ ＝ ↖]

20190903
1. Fix Audio abnormality problem on PS4

20190718
1. Support Nintendo Switch
a. Plug to Switch dock to use
b. Hold down Cross (K1), and plug to Switch dock to use

20180309
1. Fix 8 minutes time out problem for PS4 V5.5
2. For analog input, hold down PS Key on plug-in, the Y axis input will be reversed.
3. Other functions optimization

20170512
1. Fix 8 minutes time out problem for PS4 V4.55
2. Press combo keys to emulate LS, RS, DP mode

20170411
There's no update at the moment, you don't need to do firmware update

Due to different hardware versions, there are variations in firmware versions, and the system will automatically identify the appropriate update version.
----------V1.7 2023-11-21--------
Change the SOCD mode switching method:
Press and hold the following D-Pad and plug in a game console to switch SOCD mode:
← = Mode1 Up priority
←+→=null　→+←=null　↑+↓=↑　↓+↑=↑

↑ = Mode2 Capcom Tournament Edition
←+→=null　→+←=null　↑+↓=null　↓+↑=null

↓ = Mode3 Second-Input priority
←+→=→　→+←=←　↑+↓=↓　↓+↑=↑

→ = Mode4 Bypass
←+→=←+→　→+←=→+←　↑+↓=↑+↓　↓+↑=↓+↑　

20230628
M1 (V2.4) : To be updated.
M2 (V1.6)、Or (V1.1) :
1. Add SOCD mode switching:
a. Hold down left button, and then plug USB cable to console. (↑ + ↓＝ ↑ )
b. Hold down up button, and then plug USB cable to console. (↑ + ↓＝ neutral)
c. Hold down right button, and then plug USB cable to console. (Auto Detect SOCD ADC_Ry , SOCD J15 pin). Pleae refer to the SOCD Resolution on Brook website.

20230330
1. Add Capcom Tournament Mode

20191023
1. Functions optimization

20180309
1. Fix 8 minutes time out problem for PS4 V5.5
2. Other functions optimization

ONLINE-201706
Open ADC_Ry、GND: Current SOCD output
Short ADC_Ry、GND: New SOCD output, second command covers first command . ie:( ← + → = →)，( → + ← = ←)

ONLINE-20170111
Improve firmware update process-Just download this ONLINE version once, the
following firmware updates will be executed online with this program.

V1.7-20160912
Firmware optimized.

V1.6-20160722
1. Fix 8 minutes time out problem for PS4 V3.55
V1.5.1-20160617
Press combo keys for 3 seconds to switch between DP/LS/RS modes.
Options_key + Dpad_up = DP
Options_key + Dpad_left = LS
Options_key + Dpad_right = RS

V1.5-20160603
Manual combo keys setting for DP/LS/RS mode
Options_key + Dpad_up = DP
Options_key + Dpad_left = LS
Options_key + Dpad_right = RS

V1.4-20160411
1. Fix 8 minutes time out problem for PS4 V3.50
2. Manual setting for different mode
-- Press 1P and plug USB→PS3 mode
-- Press 2P and plug USB→PS4 mode
-- Press 3P and plug USB→XInput mode

V1.3-20160215
(1) Add PS4 touch emulate function
(2) Add manual detective XInput mode on PC: Press the OPTION(START) button then plug USB
(3) Adjust SOCD output setting
(4) Adjust button remap(On Xinput and PS3 mode,Touch button can be replaced with SELECT button)

！！！This firmware version is suitable for Model No. 【B-C15040-190430-V1.0】！！！
Please check the Model No. of the PS3PS4 Fighting Board Mini.

----------V2.4-20230330--------
1. Add Tournament Mode

----------V2.3-20220621--------
1. Support Brook UFB-UP5

----------V2.2-ONLINE-20191023--------
1. Functions optimization

20201104
1. Add the original touchpad emulation back
1.1 Select+L3: original touchpad emulation, Select = TP Key (default)
1.2 Select+R3: new touchpad emulation (for Ghost of Tsushima )

20200828
1. Support touch pad emulation function on Ghost of Tsushima
--Press emulation:
- Select + turn left 3DVR and press R3 / turn right 3DVR and press R3/ press R3
--Touch emulation:
- Select + turn the right 3DVR (up/down/left/right), and release Select

20200323
1. Controller Compatibility Update
--PowerA Fusion Wired Fightpad for PS4
2. Improve the problem of running in diagonal direction for using the left 3DVR in 3D games(PS4 controller on PS3)
SHARE+Square = Can run in diagonal direction
SHARE+Circle= Cannot run in diagonal direction

20191126
Controller compatibility update: Razer raiju tournament edition

20191022
1. Support to play PS2 games on fat PS3
2. Cancel Motion Sensor function in wired use
3. Fix the direction inversion problem of motion sensor when using PS3/PS4 controller on PS3

20190918
1. Controller Compatibility Update: Support ASTRO C40 TR

20190412
1. Compatibility Update: Add to support the following
--Razer Panthera Evo Arcade Stick

20180717
1. Controller compatibility update: Hori Controller Light
2. Brook Controller compatibility update: Universal Fighting Board、PS4+ Audio Fighting Board

20180309
1. Fix 8 minutes time out problem for PS4 V5.5

20180118
1. Fix the problem that PS4 Slim controller cannot be used
2. Download and update to exit steering wheel mode

V2.1.4 20171206
Controller compatibility update: Support HORIPAD3 TURBO, PS3 Move

V2.1.3 20170515
Controller Compatibility Update: Support Razer Panthera Arcade Stick, Razer Raiju Game Controller

V2.1.2 20170315
Controller Compatibility Update: Support NACON PS4 Revolution Pro Controller

V2.1.1 20161019
Controller compatibility update: Support PS4 slim controller

V2.1 20160912
Firmware optimized.

V2.0 20160722

1.Please make sure your converter has already installed 20160408 version firmware before you install 201607 version firmware
2.For the PC version, both 20160408 and 201607 are included in the zip file.
3.The Mac version includes 201607 only. Please get a PC to update 20160408.
4.Simplify firmware update process
5.Fix 8 minutes time out problem for PS4 V3.55.
6.Don't connect your controller/stick when doing update.

V1.4-20160408
1. Fix 8 minutes time out problem for PS4 V3.50
2. Improve reaction time

For the update this time, only update firmware A to fix 8 minutes time out problem

1. Download firmware accordingly and then run it
2. Connect the converter with your controller or fightstick, and then connect it to PC
3. Follow illustration to press combo buttons to enter and exit update mode
PS: Instead of L3, you can press "Left" when pressing combo buttons

V1.3-20160215
*Accommodate PS4 3.15 version
*Tournament mode:cancel turbo/remap function, after updating the light will be red+blue. This version let you use Brook converter while tournament.
*Support Arcade stick update firmware with left button and right button(equal to L3 and R3)
*Add compatibility of 1)Logitech Driving Force GT, 2)Logitech G29
*Removed Logitech Driving Force GT, Logitech G27, Logitech G29 dead zone.
*Touchpad emulation: Select button+Right Stick equal to touchpad.

20201104
1. Add the original touchpad emulation back
1.1 Select+L3: original touchpad emulation, Select = TP Key (default)
1.2 Select+R3: new touchpad emulation (for Ghost of Tsushima )

20200828
1. Support touch pad emulation function on Ghost of Tsushima
--Press emulation:
- Select + turn left 3DVR and press R3 / turn right 3DVR and press R3/ press R3
--Touch emulation:
- Select + turn the right 3DVR (up/down/left/right), and release Select

20200323
1. Controller Compatibility Update
--PowerA Fusion Wired Fightpad for PS4
2. Improve the problem of running in diagonal direction for using the left 3DVR in 3D games(PS4 controller on PS3)
SHARE+Square = Can run in diagonal direction
SHARE+Circle= Cannot run in diagonal direction

20191126
1. Controller Compatibility Update: Support Razer raiju tournament edition

20191022
1. Support to play PS2 games on fat PS3
2. Cancel Motion Sensor function in wired use
3. Fix the direction inversion problem of motion sensor when using PS3/PS4 controller on PS3

20190918
1. Controller Compatibility Update: Support ASTRO C40 TR

20190412
1. Compatibility Update: Add to support the following
--Razer Panthera Evo Arcade Stick

20180717
1. Controller compatibility update: Hori Controller Light
2. Brook Controller compatibility update: Universal Fighting Board、PS4+ Audio Fighting Board

20180309
1. Fix 8 minutes time out problem for PS4 V5.5

20180118
1. Fix the problem that PS4 Slim controller cannot be used
2. Download and update to exit steering wheel mode

20171206
Controller compatibility update: Support HORIPAD3 TURBO, PS3 Move

20170515
Controller Compatibility Update: Support Razer Panthera Arcade Stick, Razer Raiju Game Controller

V2.1.2 20170315
Controller Compatibility Update: Support NACON PS4 Revolution Pro Controller

V2.1.1 20161019
Controller compatibility update: Support PS4 slim controller

V2.1 20160912
1.Firmware optimized.

V2.0 20160726

1.Please make sure your converter has already installed 20160408 version firmware before you install 201607 version firmware
2.For the PC version, both 20160408 and 201607 are included in the zip file.
3.The Mac version includes 201607 only. Please get a PC to update 20160408.
4.Simplify firmware update process
5.Fix 8 minutes time out problem for PS4 V3.55.
6.Don't connect your controller/stick when doing update.
20160408
1. Fix 8 minutes time out problem for PS4 V3.50
2. Improve reaction time

For the update this time, only update firmware A to fix 8 minutes time out problem

1. Download firmware accordingly and then run it
2. Connect the converter with your controller or fightstick, and then connect it to PC
3. Follow illustration to press combo buttons to enter and exit update mode
PS: Instead of L3, you can press "Left" when pressing combo buttons

V1.3-20160215
*Accommodate PS4 3.15 version
*This is the tournament edition fireware. No turbo and remaping functions. The red and ble LEDs will be turned on after the fireware was updated.
*Tournament mode:cancel turbo/remap function, after updating the light will be red+blue. This version let you use Brook converter while tournament.
*Support Arcade stick update firmware with left button and right button(equal to L3 and R3)
*Add compatibility of 1)Logitech Driving Force GT, 2)Logitech G29
*Removed Logitech Driving Force GT, Logitech G27, Logitech G29 dead zone.

20180107
1. Fix steering abnormality for using LDFGT on GT Sport.
2. Tick the Controller Compatibility Update box before tapping the Update button every time when doing Steering Wheel version firmware update


20181210
1. Fix steering abnormality for using LDFGT on GT Sport.

20180309
1. Fix 8 minutes time out problem for PS4 V5.5

20180110
1. Update the firmware for using racing wheel, wired used and on PS4 only.
Support Logitech WingMan(no force feedback), Logitech Driving Force Pro, Logitech Driving Force GT and
G27.
2. Use on PS4 only.
3. It doesn’t support Turbo/Remap function.
4. Download and update the PS3PS4toPS3PS4_Online firmware to switch the converter back to the original function (use with controller).

20211102
1. Fix dual play abnormality when using on Switch

20210305
1. Controller Compatibility Update, add to support
　　SEGA Astro City Mini controller
　　SEGA Astro City Mini arcade stick
　　MEGA Drive mini six-button controller
Refer to product introduction page for mapping table

20200910
1. Fix “unable to use 2 converters on PS3” problem
2. Button emulation change: use PS3 controller on PS4(SHARE/TouchPad) and on Switch(-/CAPTURE)
On PS4：
--SELECT + START= SHARE
--Press emulation:
-SELECT + L1= press the middle of TouchPad
-SELECT + D-Pad /press R3 = press TouchPad(D-Pad /direction of pressed R3 determines the pressed part of TouchPad)
--Touch emulation:
-SELECT + R1 + turn R3 = touch TouchPad(direction of R3 determines the touched part of TouchPad)
On Switch：
--SELECT +START= MINUS
--SELECT +L1/R1/R3/D-Pad = CAPTURE

20230504
1. Controller compatibility update: add to support
　A. Wii U PRO Bluetooth
　B. PS5 DualSense Edge
2. Optimization and correction
　A. Optimize the functions on Steamdeck, and fix the problem that the game console does not respond after waking up after hibernation
　B. Optimize the vibration intensity of the PS5 controller
　C. Fix the problem that the RetroBit 2.4G controller does not respond
　D. Fixed the LB RB button swap problem of Razer Atrox fight stick
3. Function update: Touch simulation function can be turned off
　A. (PS+Triangle=close simulation), Select=Share, Start=Option
　B. (PS+Cross=open simulation), Select=Touch simulation, Select+Start=Share

20221129
1. Controller compatibility update: add to support
　Brook Vivid controller
2. Fix L2/R2 input abnormality when using Switch Pro controller on PS3
3. Automatically save the setting of turning on/off 3DVR magnification
4. Support remained power display on consoles with using the following official controllers
　Console support: PS3/ NS
　Controller support: PS3, PS4, PS5, NS Pro, XBOX360 wireless controller

20220629
1. Controller compatibility update: add to support
　 Brook Vivid controller
2. Support to save 3DVR adjustment setting

20220513
1. Fix input fault when using PS3 controller on PS4：Select+Start=Share
2. Fix input fault when using PS3 controller on NS：pressing Select inputs no command

20220412
1. Controller compatibility update: add to support
　 PDP faceoff Deluxe+
　Victrix Gambit World's Fastest XBOX controller
　8BitDoSN30pro
　Mad Catz PS3 Street Fighter IV Fight Stick
　Egret II mini Controller & Arcade
　 8bitdo PRO2

----------V2.6-ONLINE-2023-10-12--------
1. Added compatibility
Guitar controller for PS2 Guitar Hero (used as a general game controller)

----------V2.5-ONLINE-20201029--------
1. Add the original touchpad emulation back
1.1 Select+L3: original touchpad emulation, Select = TP Key (default)
1.2 Select+R3: new touchpad emulation (for Ghost of Tsushima )

----------V2.4-ONLINE-20200819--------
1. Support touch pad emulation function on Ghost of Tsushima
--Press emulation:
- Select + turn left 3DVR and press R3 / turn right 3DVR and press R3/ press R3
--Touch emulation:
- Select + turn the right 3DVR (up/down/left/right), and release Select

----------V2.3-ONLINE-20180420--------
1. Support to play PS2 games on PS3

----------V2.2-ONLINE-20180309--------
1. Fix 8 minutes time out problem for PS4 V5.5

----------V2.1-ONLINE-201706--------
1. Improve 3DVR problem in Tekken 7.
2. Other problem fixed.

----------V1.8-ONLINE-20170111--------
Improve firmware update process-Just download this ONLINE version once, the
following firmware updates will be executed online with this program.

-------------V1.8-20160722-----------
1. Fix 8 minutes time out problem for PS4 V3.55

20160603
1. Improve accelerator control when using gamepad in racing games
2. Other problems fixed

20160415
1. Fix 8 minutes time out problem for PS4 V3.50
2. SELECT + START = SHARE
3. SELECT + right 3DVR = TouchPad
4. START = OPTION

20160205
Add PS4 touch eimulate function

2023-09-07
V2.5TE
1. Added Tournament mode
--This version removes Turbo and Remap functions

20201104
1. Add the original touchpad emulation back
1.1 Select+L3: original touchpad emulation, Select = TP Key (default)
1.2 Select+R3: new touchpad emulation (for Ghost of Tsushima )

20200828
1. Support touch pad emulation function on Ghost of Tsushima
--Press emulation:
- Select + turn left 3DVR and press R3 / turn right 3DVR and press R3/ press R3
--Touch emulation:
- Select + turn the right 3DVR (up/down/left/right), and release Select

20180423
1. Support to play PS2 games on PS3

20180309
1. Fix 8 minutes time out problem for PS4 V5.5

ONLINE-201706
1. Improve 3DVR problem in Tekken 7.
2. Other problem fixed.

ONLINE-20170111
Improve firmware update process-Just download this ONLINE version once, the
following firmware updates will be executed online with this program.

20160912
Firmware optimized.

20160726
1. Fix 8 minutes time out problem for PS4 V3.55

20160603
1. Improve accelerator control when using gamepad in racing games
2. Other problems fixed

20160415
1. Fix 8 minutes time out problem for PS4 V3.50
2. SELECT + START = SHARE
3. SELECT + right 3DVR = TouchPad
4. START = OPTION

20160215
*Accommodate PS4 3.15 version
*Tournament mode:cancel turbo/remap function, this version let you use Brook converter while tournament.
*Support Arcade stick update firmware with left button and right button(equal to L3 and R3)

20200910
1. Fix “unable to use 2 converters on PS3” problem
2. Button emulation change: emulate SELECT/PS on PS3 controller, SHARE/PS/TouchPad on PS4 and -/HOME/CAPTURE on Switch
On PS3:
SELECT+START = SELECT
SELECT +L1 = PS
On PS4：
SELECT +START= SHARE
SELECT +L1 = PS
--Press emulation:
-SELECT + L2/R2= press the middle of TouchPad
-SELECT + D-Pad /press R3 = press TouchPad(D-Pad /direction of pressed R3 determines the pressed part of TouchPad)
--Touch emulation:
-SELECT + R1 + turn R3 = touch TouchPad(direction of R3 determines the touched part of TouchPad)
On Switch：
SELECT +START= MINUS
SELECT +L1 = HOME
SELECT +R1/R3 = CAPTURE

20210119
1. Controller compatibility update: add to support PS5 DualSence controller (wireless use only, the pairing method is like pairing PS4 controller)

20200803
1. Controller Compatibility Update, add to support
-- HORI ONYX WIRELESS CONTROLLER
-- HORI Wireless Controller Light
-- Razer Raiju Tournament
-- Razer Raiju Ultimate (controller in PC BT mode, then hold down PS+OPTIONS to pair)
2. Improve wireless connection stability for XBOX Elite 2 controller
3. Improve input latency for using Switch Pro controller
4. Support touch pad emulation function on Ghost of Tsushima
--Press emulation:
-Switch Pro controller: Capture + turn left 3DVR and press R3 / turn right 3DVR and press R3/ press R3
-PS4 controller: SHARE + turn left 3DVR and press R3 / turn right 3DVR and press R3/ press R3
-Wii U Pro controller: SELECT + R + turn left 3DVR and press R3 / turn right 3DVR and press R3/ press R3
-Xbox one controller (with Bluetooth): VIEW + RB + turn left 3DVR and press R3 / turn right 3DVR and press R3/ press R3

--Touch emulation:
-Switch Pro controller: Capture + turn the right 3DVR (up/down/left/right), and release Capture
-PS4 controller: SHARE + turn the right 3DVR (up/down/left/right), and release SHARE
-Wii U Pro controller: SELECT + R + turn the right 3DVR (up/down/left/right), and release SELECT + R
- Xbox one controller (with Bluetooth): VIEW + RB + turn the right 3DVR (up/down/left/right), and release VIEW + RB

20200611
1. Support Xbox Elite 2 controller with vibration function
2. Fix random signal stuck problem of Brook key
3. Improve the stability of wireless registration

20200323
1. Improve the support of Xbox one S controller
2. Add to support
--Wii Classic controllers
--SFC Mini controller
--Wii Hori fighting stick
Button mapping
L2: Minus+Y
R2: Minus+X
L3: Minus+B
R3: Minus+A

20200115
1. Improve connection stability of Nintendo Switch Pro controller
2. Controller compatibility update: Support Xbox Elite 2
2.1 Support: turbo/remap of the 4 paddles (the 4 direction keys can be mapped to the 4 paddles)
2.2 Not support: vibration

20190814
1. Controller Compatibility Update: Support Xbox one S controller
1.1 Hold down the Brook Key until the Brook LED fast flashes red (Pairing Mode)
1.2 Press the Xbox key to wake up the controller, then press the SYNC button on the controller for pairing

20230112
1. Fix to support Elite 2 with firmware version 5.15.3168.0

20210120
1. Controller compatibility update: add to support Xbox Series X/S controller(wired use)

20201104
1. Add the original touchpad emulation back
1.1 View +L3: original touchpad emulation, View = TP Key (default)
1.2 View +R3: new touchpad emulation (for Ghost of Tsushima )

20200828
1. Support touch pad emulation function on Ghost of Tsushima
--Press emulation:
- Select + turn left 3DVR and press R3 / turn right 3DVR and press R3/ press R3
--Touch emulation:
- Select + turn the right 3DVR (up/down/left/right), and release VIEW

20191126
1.Controller compatibility update: Support XBOX ELITE 2 and PowerA Fusion Pro

20190107
1. Controller compatibility update: Support Xbox Adaptive Controller

20180827
1. Controller compatibility update: Support PDP Rock Candy Gamepad for Xbox 360

20180503
1. Controller compatibility update: Support PDP Wired Controller for XBOX One & PDP Stealth series Wired controller for XBOX One

20180309
1. Fix 8 minutes time out problem for PS4 V5.5

20180118
1. Download and update to exit steering wheel mode

20171003
Controller compatibility update: PDP Afterglow Prismatic Wired Controller for XBOX One

20170717
Controller compatibility update : PowerA mini

20170427
Controller compatibility update: Support PowerA Fusion Controller

20170206
Controller compatibility update.

20161213
Fixed 3DVR in the 「The Division」 game can not be centered

20161005
Controller compatibility update: Support Microsoft Xbox One S controller.

20160912
Firmware optimized.


20160722

1.Please make sure your converter has already installed 20160408 version firmware before you install 201607 version firmware
2.For the PC version, both 20160408 and 201607 are included in the zip file.
3.The Mac version includes 201607 only. Please get a PC to update 20160408.
4.Simplify firmware update process
5.Fix 8 minutes time out problem for PS4 V3.55.
6.Don't connect your controller/stick when doing update.
V1.8 20160408
1. Fix 8 minutes time out problem for PS4 V3.50
2. Improve reaction time

For the update this time, only update firmware A to fix 8 minutes time out problem

1. Download firmware accordingly and then run it
2. Connect the converter with your controller or fightstick, and then connect it to PC
3. Follow illustration to press combo buttons to enter and exit update mode
PS: Instead of L3, you can press "Left" when pressing combo buttons

20230112
1. Fix to support Elite 2 with firmware version 5.15.3168.0

20210120
1. Controller compatibility update: add to support Xbox Series X/S controller(wired use)

20201104
1. Add the original touchpad emulation back
1.1 View +L3: original touchpad emulation, View = TP Key (default)
1.2 View +R3: new touchpad emulation (for Ghost of Tsushima )

20200828
1. Support touch pad emulation function on Ghost of Tsushima
--Press emulation:
- Select + turn left 3DVR and press R3 / turn right 3DVR and press R3/ press R3
--Touch emulation:
- Select + turn the right 3DVR (up/down/left/right), and release Select

20191126
1.Controller compatibility update: Support XBOX ELITE 2 and PowerA Fusion Pro

20180107
1. Controller compatibility update: Support Xbox Adaptive Controller

20180827
1. Controller compatibility update: Support PDP Rock Candy Gamepad for Xbox 360

20180503
1. Controller compatibility update: Support PDP Wired Controller for XBOX One & PDP Stealth series Wired controller for XBOX One

20180309
1. Fix 8 minutes time out problem for PS4 V5.5

20171003
Controller compatibility update : PDP Afterglow Prismatic Wired Controller for XBOX One

20170717
Controller compatibility update

20170427
Controller compatibility update: Support PowerA Fusion Controller

20170206
Controller compatibility update.

20161213
Fixed 3DVR in the 「The Division」 game can not be centered

20161005
Controller compatibility update: Support Microsoft Xbox One S controller.

20160912
1.Firmware optimized.

20160726

1.Please make sure your converter has already installed 20160408 version firmware before you install 201607 version firmware
2.For the PC version, both 20160408 and 201607 are included in the zip file.
3.The Mac version includes 201607 only. Please get a PC to update 20160408.
4.Simplify firmware update process
5.Fix 8 minutes time out problem for PS4 V3.55.
6.Don't connect your controller/stick when doing update.

V1.8 20160408
1. Fix 8 minutes time out problem for PS4 V3.50
2. Improve reaction time

For the update this time, only update firmware A to fix 8 minutes time out problem

1. Download firmware accordingly and then run it
2. Connect the converter with your controller or fightstick, and then connect it to PC
3. Follow illustration to press combo buttons to enter and exit update mode

20210120
1. Controller compatibility update: add to support PS5 DualSense controller(wired use)

20201104
1. Add the original touchpad emulation back
1.1 Select+L3: original touchpad emulation, Select = TP Key (default)
1.2 Select+R3: new touchpad emulation (for Ghost of Tsushima )
2. Controller Compatibility Update: add to support Personal Communication System Inc USB GamePad

20200828
1. Support touch pad emulation function on Ghost of Tsushima
--Press emulation:
- Select + turn left 3DVR and press R3 / turn right 3DVR and press R3/ press R3
--Touch emulation:
- Select + turn the right 3DVR (up/down/left/right), and release Select

20190522
1. Controller Compatibility Update:
A. Support Sega Genesis USB Arcade Pad (Retro-Bit) / Sega Saturn Slate Grey USB Wired Arcade Pad Controller (Retro-Bit)

20180410
1. Controller Compatibility Update:
A. No longer support racing wheel. To use it with racing wheel, please update the For SteeringWheel firmware
B. Support Zero Delay USB Encoder

20180309
1. Fix 8 minutes time out problem for PS4 V5.5

V2.2 20171226
1. Download and update to exit steering wheel mode
2. Controller compatibility update: Support Razer Panthera Arcade Stick

V2.1 20160912
Firmware optimized.

V2.0 20160722

1.Please make sure your converter has already installed 20160408 version firmware before you install 201607 version firmware
2.For the PC version, both 20160408 and 201607 are included in the zip file.
3.The Mac version includes 201607 only. Please get a PC to update 20160408.
4.Simplify firmware update process
5.Fix 8 minutes time out problem for PS4 V3.55.
6.Don't connect your controller/stick when doing update.
V1.7 20160408
1. Fix 8 minutes time out problem for PS4 V3.50
2. Improve reaction time

For the update this time, only update firmware A to fix 8 minutes time out problem

1. Download firmware accordingly and then run it
2. Connect the converter with your controller or fightstick, and then connect it to PC
3. Follow illustration to press combo buttons to enter and exit update mode
PS: Instead of L3, you can press "Left" when pressing combo buttons

20210120
1. Controller compatibility update: add to support PS5 DualSense controller(wired use)

20201104
1. Add the original touchpad emulation back
1.1 Select+L3: original touchpad emulation, Select = TP Key (default)
1.2 Select+R3: new touchpad emulation (for Ghost of Tsushima )
2. Controller Compatibility Update: add to support Personal Communication System Inc USB GamePad

20200828
1. Support touch pad emulation function on Ghost of Tsushima
--Press emulation:
- Select + turn left 3DVR and press R3 / turn right 3DVR and press R3/ press R3
--Touch emulation:
- Select + turn the right 3DVR (up/down/left/right), and release Select

20190522
1. Controller Compatibility Update:
A. Support Sega Genesis USB Arcade Pad (Retro-Bit) / Sega Saturn Slate Grey USB Wired Arcade Pad Controller (Retro-Bit)

20180410
1. Controller Compatibility Update:
A. No longer support racing wheel. To use it with racing wheel, please update the For SteeringWheel firmware
B. Support Zero Delay USB Encoder

20180309
1. Fix 8 minutes time out problem for PS4 V5.5

20170515
Controller compatibility update: Support Razer Panthera Arcade Stick

20160912
Firmware optimized.

20160726

1.Please make sure your converter has already installed 20160408 version firmware before you install 201607 version firmware
2.For the PC version, both 20160408 and 201607 are included in the zip file.
3.The Mac version includes 201607 only. Please get a PC to update 20160408.
4.Simplify firmware update process
5.Fix 8 minutes time out problem for PS4 V3.55.
6.Don't connect your controller/stick when doing update.

20160408
1. Fix 8 minutes time out problem for PS4 V3.50
2. Improve reaction time

For the update this time,only update firmware A to fix 8 minutes time out problem

1. Download firmware accordingly and then run it
2. Connect the converter with your controller or fightstick, and then connect it to PC
3. Follow illustration to press combo buttons to enter and exit update mode
PS: Instead of L3, you can press "Left" when pressing combo buttons

20180309
1. Fix 8 minutes time out problem for PS4 V5.5
2. Tick the Controller Compatibility Update box before tapping the Update button every time when doing Steering Wheel version firmware update

20171222
1. Update the firmware for using racing wheel, wired used only.
Support Logitech WingMan(no force feedback), Logitech Driving Force Pro, Logitech Driving Force GT and
G27.
2. It doesn’t support Turbo/Remap function.
3. Download and update the PS3 toPS4_Online firmware to switch the converter back to the original function (use with controller).

20230112
1. Fix to support Elite 2 with firmware version 5.15.3168.0

20210120
1. Controller compatibility update: add to support Xbox Series X/S controller(wired use)

20201104
1. Add the original touchpad emulation back
1.1 View +L3: original touchpad emulation, View = TP Key (default)
1.2 View +R3: new touchpad emulation (for Ghost of Tsushima )

20200828
1. Support touch pad emulation function on Ghost of Tsushima
--Press emulation:
- Select + turn left 3DVR and press R3 / turn right 3DVR and press R3/ press R3
--Touch emulation:
- Select + turn the right 3DVR (up/down/left/right), and release VIEW

20191220
1. Fix XBOX Elite2 controller no response problem after XBOX Elite2 itself is mapped buttons on PC

20191126
1. Controller compatibility update: Support XBOX ELITE 2 and PowerA Fusion Pro

20190107
1. Controller compatibility update: Support Xbox Adaptive Controller

20180827
1. Controller compatibility update

20180503
Controller compatibility update: Support PDP Wired Controller for XBOX One & PDP Stealth series Wired controller for XBOX One

20180309
1. Fix 8 minutes time out problem for PS4 V5.5

20171003
Controller compatibility update: PDP Afterglow Prismatic Wired Controller for XBOX One

20170717
Controller compatibility update

20170427
Controller compatibility update: Support PowerA Fusion Controller

20170206
Controller compatibility update.

20161213
Fixed 3DVR in the 「The Division」 game can not be centered

20161005
Controller compatibility update: Support Microsoft Xbox One S controller.

20160912
Firmware optimized.

V2.1 20160722

1.Please make sure your converter has already installed 20160408 version firmware before you install 201607 version firmware
2.For the PC version, both 20160408 and 201607 are included in the zip file.
3.The Mac version includes 201607 only. Please get a PC to update 20160408.
4.Simplify firmware update process
5.Fix 8 minutes time out problem for PS4 V3.55.
6.Don't connect your controller/stick when doing update.

V1.8 20160408
1. Fix 8 minutes time out problem for PS4 V3.50
2. Improve reaction time

For the update this time, only update firmware A to fix 8 minutes time out problem

1. Download firmware accordingly and then run it
2. Connect the converter with your controller or fightstick, and then connect it to PC
3. Follow illustration to press combo buttons to enter and exit update mode
PS: Instead of L3, you can press "Left" when pressing combo buttons

20220513
1. first edition

20230112
1. Fix to support Elite 2 with firmware version 5.15.3168.0

20210120
1. Controller compatibility update: add to support Xbox Series X/S controller(wired use)

20201104
1. Add the original touchpad emulation back
1.1 View +L3: original touchpad emulation, View = TP Key (default)
1.2 View +R3: new touchpad emulation (for Ghost of Tsushima )

20200828
1. Support touch pad emulation function on Ghost of Tsushima
--Press emulation:
- Select + turn left 3DVR and press R3 / turn right 3DVR and press R3/ press R3
--Touch emulation:
- Select + turn the right 3DVR (up/down/left/right), and release VIEW

20191220
1. Fix XBOX Elite2 controller no response problem after XBOX Elite2 itself is mapped buttons on PC

20191126
1. Controller compatibility update: Support XBOX ELITE 2 and PowerA Fusion Pro

20190107
1. Controller compatibility update: Support Xbox Adaptive Controller

20180827
1. Controller compatibility update

20180503
Controller compatibility update: Support PDP Wired Controller for XBOX One & PDP Stealth series Wired controller for XBOX One

20180309
1. Fix 8 minutes time out problem for PS4 V5.5

20171003
Controller compatibility update: PDP Afterglow Prismatic Wired Controller for XBOX One

20170717
Controller compatibility update

20170427
Controller compatibility update: Support PowerA Fusion Controller

20170206
Controller compatibility update.

20161213
Fixed 3DVR in the 「The Division」 game can not be centered

20161005
Controller compatibility update: Support Microsoft Xbox One S controller.

20160912
Firmware optimized.

20160726

1.Please make sure your converter has already installed 20160408 version firmware before you install 201607 version firmware
2.For the PC version, both 20160408 and 201607 are included in the zip file.
3.The Mac version includes 201607 only. Please get a PC to update 20160408.
4.Simplify firmware update process
5.Fix 8 minutes time out problem for PS4 V3.55.
6.Don't connect your controller/stick when doing update.

V1.8 20160408
1. Fix 8 minutes time out problem for PS4 V3.50
2. Improve reaction time

For the update this time, only update firmware A to fix 8 minutes time out problem

1. Download firmware accordingly and then run it
2. Connect the converter with your controller or fightstick, and then connect it to PC
3. Follow illustration to press combo buttons to enter and exit update mode
PS: Instead of L3, you can press "Left" when pressing combo buttons

20200828
1. Support touch pad emulation function on Ghost of Tsushima
--Press emulation:
- Select + turn left 3DVR and press R3 / turn right 3DVR and press R3/ press R3
--Touch emulation:
- Select + turn the right 3DVR (up/down/left/right), and release Select

20190107
1. Controller compatibility update: Support Xbox Adaptive Controller
20201104
1. Add the original touchpad emulation back
1.1 Back +L3: original touchpad emulation, Back = TP Key (default)
1.2 Back +R3: new touchpad emulation (for Ghost of Tsushima )

20180827
1. Controller compatibility update: Support PDP Rock Candy Gamepad for Xbox 360

20180503
1. Controller compatibility update

20180309
1. Fix 8 minutes time out problem for PS4 V5.5

20171003
Controller compatibility update

20170717
Controller compatibility update

20170427
Controller compatibility update: Support PowerA Fusion Controller

20170206
Controller compatibility update.

20161213
Fixed 3DVR in the 「The Division」 game can not be centered.

20161005
Controller compatibility update: Support Microsoft Xbox One S controller

20160912
Firmware optimized.

V2.0 20160722

1.Please make sure your converter has already installed 20160408 version firmware before you install 201607 version firmware
2.For the PC version, both 20160408 and 201607 are included in the zip file.
3.The Mac version includes 201607 only. Please get a PC to update 20160408.
4.Simplify firmware update process
5.Fix 8 minutes time out problem for PS4 V3.55.
6.Don't connect your controller/stick when doing update.

V1.6 20160408
1. Fix 8 minutes time out problem for PS4 V3.50
2. Improve reaction time

For the update this time, only update firmware A to fix 8 minutes time out problem

1. Download firmware accordingly and then run it
2. Connect the converter with your controller or fightstick, and then connect it to PC
3. Follow illustration to press combo buttons to enter and exit update mode
PS: Instead of L3, you can press "Left" when pressing combo buttons

V1.5-20160215
Touchpad emulation: Select button+Right Stick equal to touchpad.

20201104
1. Add the original touchpad emulation back
1.1 Back +L3: original touchpad emulation, Back = TP Key (default)
1.2 Back +R3: new touchpad emulation (for Ghost of Tsushima )

20200828
1. Support touch pad emulation function on Ghost of Tsushima
--Press emulation:
- Select + turn left 3DVR and press R3 / turn right 3DVR and press R3/ press R3
--Touch emulation:
- Select + turn the right 3DVR (up/down/left/right), and release Select

20190107
1. Controller compatibility update: Support Xbox Adaptive Controller

20180827
1. Controller compatibility update: Support PDP Rock Candy Gamepad for Xbox 360

20180503
1. Controller compatibility update

20180309
1. Fix 8 minutes time out problem for PS4 V5.5

20171003
Controller compatibility update

20170717
Controller compatibility update

20170427
Controller compatibility update: Support PowerA Fusion Controller

20170206
Controller compatibility update.

20161213
Fixed 3DVR in the 「The Division」 game can not be centered

20161005
Controller compatibility update: Support Microsoft Xbox One S controller

20160912
Firmware optimized.

20160726

1.Please make sure your converter has already installed 20160408 version firmware before you install 201607 version firmware
2.For the PC version, both 20160408 and 201607 are included in the zip file.
3.The Mac version includes 201607 only. Please get a PC to update 20160408.
4.Simplify firmware update process
5.Fix 8 minutes time out problem for PS4 V3.55.
6.Don't connect your controller/stick when doing update.

V1.6 20160408
1. Fix 8 minutes time out problem for PS4 V3.50
2. Improve reaction time

For the update this time, only update firmware A to fix 8 minutes time out problem

1. Download firmware accordingly and then run it
2. Connect the converter with your controller or fightstick, and then connect it to PC
3. Follow illustration to press combo buttons to enter and exit update mode
PS: Instead of L3, you can press "Left" when pressing combo buttons