UNIVERSAL FIGHTING BOARD

 Enchant your stick 
​ With Lowest Latency 
 In the world 

The Brook UNIVERSAL FIGHTING BOARD PCB supports XB Series, PS4, PS3, Wii U PC, Switch,  NEOGEO mini, PS Classic and MD mini. Low-delay design give you the best game experience.
Support Brook UFB-UP5 !


20231110 firmware update (V4.0.1)
1. Memorize manual switching of console mode and SOCD mode
2. Change the SOCD mode switching method:
Press and hold the button and plug in a game console to switch SOCD mode

Features

  • Console manual selection
    PS4 / PS4 games on PS5 / PS3 / XB 360 / Wii U / PS classic / MD mini
  • Multi-console support
    XB 360 / PS4 / PS4 games on PS5 / PS3 / PC / Wii U / Switch / PS Mini / MD mini
  • No 8-minuste timeout issue on PS4
  • Support SOCD modes
  • Effortless installation
    Screw terminal block for easy connections
  • Turbo support
  • Upgradable firmware via USB
  • PS4 controller touchpad button simulation
  • XInput support
  • Console auto detection
    PS3 / PS4 / XB 360
  • Provides both Pin/Connector included ver. and Empty socket ver.



Emulate function

Touchpad Emulate


 

 

LS, RS, DP Emulate

For those who don't have LS, RS, DP switch, it's able to press combo keys for 3 seconds to swich between LS, RS, DP modes.

SOCD Modes

 

Mode 1-UP Priority

Mode 2- CAPCOM / Neutral

Mode 3-Last Priority

Mode 4-BYPASS

Switch method

Hold down the Left button and then insert into the console to initiate switching.

Hold down the Up button and then insert into the console to initiate switching.

Hold down the Down button and then insert into the console to initiate switching.

Hold down the Right button and then insert into the console to initiate switching.

← +

Neutral

Neutral

← +

→ +

Neutral

Neutral

→ +

↑ +

Neutral

↑ +

↓ +

Neutral

↓ +

1. Default setting is mode 1.
2. SOCD will be automatically saved.
3.The BYPASS function still depends on how each game or console recognizes direction conflict detection. Even if there is a conflict in controller input commands, it may still be recognized by the game as different commands.

 

 

 

Console manual selection



The Brook UNIVERSAL FIGHTING BOARD PCB support manual selection of PS4, PS3, XB One, XB 360 mode and Wii U / Switch, suggest be set to XB 360 mode on PC.

Manual Mode
Step 1 : Press button:

  • 1P for PS3 
  • 2P for PS4
  • 3P for XB 360
  • 4P for XB One
  • 1K for Wii U - Pokken Tournament and Switch
  • 2K for Original XB
  • 3K for Neogeo Mini
  • 1P+2P together for PS Classic
  • 1P+1K together for MD mini

Step 2 : While Pressing connect fightstick to PC

* When uses manual mode, the device mode will be saved automatically.
If you want to switch back to the automatic detection mode, please hold down "Option (menu)" button and then plug USB cable to PC / console.

 

Verification to Nintendo Switch

Step 1 : Check "Pro Controller Wired Communication":
On Switch, go to System Settings -> Controllers and Sensors, and turn ON Pro Controller Wired Communication.

Step 2 : Press 1K button:
1K for Wii U/Switch - Pokken Tournament and Nintendo Switch    

Step 3 : While pressing 1K, connect fightstick to corresponding console

*Refer to UFB introduction page for button configuration

Verification  –  Switch

4 steps to contact Nintendo Switch.

Step1:

Press X (A) button and plug USB port to your Switch.

Step2:

Select the controllers setting button on Switch with the joycon

Step3:

Select the “Change Grip/Order

 

Step4:

The controller symbol will appear when pairing is complete.

 

Support PS2 games compatible with PS3

Step 1.
For playing PS2 game on PS3 console, press and hold 1P on the fight stick in the main page of PS2 game.

 

Step 2.
While pressing, connect fight stick to PS3
In the case states above, you will need to unplug our device after playing and go step 1 again after rebooting.

Support PSMini

Please hold down □△ and plug it to PS Mini to use.

Support to play games on NeoGeoMini.


Hold down R2 and plug UFB to NeoGeoMini to play. 

There are 5 mapping layouts. Switch between different layouts when UFB is plugged to NeoGeoMini

The layout can be memorized even if UFB is unplugged.

(1) TYPE A:  PS +△ (default)
(2) TYPE B:  PS +○
(3) TYPE C:  PS +R1
(4) TYPE D:  PS +╳
(5) TYPE E:  PS +○+R2

Refer to the product introduction page for the mapping chart.

Button Configuration

Pokken Tournament Pro Pad Button Configuration

Connecting


Notice

In order to prevent unexpected errors, we recommend you switch to XB 360 mode manually before plugging in to PC which runs on OS earlier than Win 10.

Unboxing

      

Where To Buy

 

 

Official   

Global              

                     

USA           

Europe            

                        

Australia         
                                

South America         

Korea     

3F., No.121, Jian 8th Rd., Zhonghe Dist., New Taipei City 23585, Taiwan

Tel: +886-2-6620-2225 #361|Fax: +886-2-6620-2226|Business Hours: 10:00 AM to 6:00 PM (GMT+8)

Copyright © Zeroplus Technology Co. Ltd All Rights Reserved. Brook is the registered trademark of Brook Design, LLC.