FAQ

Q: I don’t know how to do firmware update, how can I do?

A: There’s firmware update guide for you to download and read.

     You can download it from Brook’s official website.

     Go to “Support è Download”

     Brook’s official website download page: http://www.brookaccessory.com/download/

Q : I have some problem with firmware update.

A : Should you have any problem, please try the troubleshooting methods as below :

1. Disconnect, reconnect and retry
2. Switch another USB port and retry
3. Use another PC and retry
4. Restart PC and retry
5. Restart firmware and retry
6. Use another controller and retry
7. Shorten cable length/Use another cable and retry
8. Make sure you download the correct file
9. If you have installed ZeroPlus Driver before, remove it and retry
10. Disable antivirus and retry
11. Run the program as administrator

     If you have tried all the methods above and your problem still exists, log on to Brook’s official website, go to “Contact us” for assistance.

Q : Do I need to do firmware update if there's new release ?

A : As long as you can use the converter without any problem, you don't have to do firmware update.

Q : What should I pay attention to for firmware update ?

A: 

1. Firmware update must be done on a PC, it cannot be done on a console.
2. Operate it on desktop PC. For laptop, please connect your laptop to power supply.
3. Do it on Windows 7(and above) or Mac.
4. Disable antivirus when operating.
5. Don’t remove the converter while update is running.
6. Make sure the PC has smooth internet stream

Q : My converter is stuck in purple light(update mode).

A:

1. Redo fimware update again.
2. Disconnect, reconnect and retry fimware update.
3. Contact Brook for further assistance.

Q: I don’t know how to do firmware update, how can I do?

A: There’s firmware update guide for you to download and read.

     You can download it from Brook’s official website.

     Go to “Support è Download”

     Brook’s official website download page: http://www.brookaccessory.com/download/

Q : I have some problem with firmware update.

A : Should you have any problem, please try the troubleshooting methods as below :

1. Disconnect, reconnect and retry
2. Switch another USB port and retry
3. Use another PC and retry
4. Restart PC and retry
5. Restart firmware and retry
6. Use another controller and retry
7. Shorten cable length/Use another cable and retry
8. Make sure you download the correct file
9. If you have installed ZeroPlus Driver before, remove it and retry
10. Disable antivirus and retry
11. Run the program as administrator

     If you have tried all the methods above and your problem still exists, log on to Brook’s official website, go to “Contact us” for assistance.

Q : Do I need to do firmware update if there's new release ?

A : As long as you can use the converter without any problem, you don't have to do firmware update.

Q : What should I pay attention to for firmware update ?

A: 

1. Firmware update must be done on a PC, it cannot be done on a console.
2. Operate it on desktop PC. For laptop, please connect your laptop to power supply.
3. Do it on Windows 7(and above) or Mac.
4. Disable antivirus when operating.
5. Don’t remove the converter while update is running.
6. Make sure the PC has smooth internet stream

Q : My converter is stuck in purple light(update mode).

A:

1. Redo fimware update again.
2. Disconnect, reconnect and retry fimware update.
3. Contact Brook for further assistance.

Q: I don’t know how to do firmware update, how can I do?

A: There’s firmware update guide for you to download and read.

     You can download it from Brook’s official website.

     Go to “Support è Download”

     Brook’s official website download page: http://www.brookaccessory.com/download/

Q : I have some problem with firmware update.

A : Should you have any problem, please try the troubleshooting methods as below :

1. Disconnect, reconnect and retry
2. Switch another USB port and retry
3. Use another PC and retry
4. Restart PC and retry
5. Restart firmware and retry
6. Use another controller and retry
7. Shorten cable length/Use another cable and retry
8. Make sure you download the correct file
9. If you have installed ZeroPlus Driver before, remove it and retry
10. Disable antivirus and retry
11. Run the program as administrator

     If you have tried all the methods above and your problem still exists, log on to Brook’s official website, go to “Contact us” for assistance.

Q : Do I need to do firmware update if there's new release ?

A : As long as you can use the converter without any problem, you don't have to do firmware update.

Q : What should I pay attention to for firmware update ?

A: 

1. Firmware update must be done on a PC, it cannot be done on a console.
2. Operate it on desktop PC. For laptop, please connect your laptop to power supply.
3. Do it on Windows 7(and above) or Mac.
4. Disable antivirus when operating.
5. Don’t remove the converter while update is running.
6. Make sure the PC has smooth internet stream

Q: I don’t know how to do firmware update, how can I do?

A: There’s firmware update guide for you to download and read.

     You can download it from Brook’s official website.

     Go to “Support è Download”

     Brook’s official website download page: http://www.brookaccessory.com/download/

Q : I have some problem with firmware update.

A : Should you have any problem, please try the troubleshooting methods as below :

1. Disconnect, reconnect and retry
2. Switch another USB port and retry
3. Use another PC and retry
4. Restart PC and retry
5. Restart firmware and retry
6. Use another controller and retry
7. Shorten cable length/Use another cable and retry
8. Make sure you download the correct file
9. If you have installed ZeroPlus Driver before, remove it and retry
10. Disable antivirus and retry
11. Run the program as administrator

     If you have tried all the methods above and your problem still exists, log on to Brook’s official website, go to “Contact us” for assistance.

Q : Do I need to do firmware update if there's new release ?

A : As long as you can use the converter without any problem, you don't have to do firmware update.

Q : What should I pay attention to for firmware update ?

A: 

1. Firmware update must be done on a PC, it cannot be done on a console.
2. Operate it on desktop PC. For laptop, please connect your laptop to power supply.
3. Do it on Windows 7(and above) or Mac.
4. Disable antivirus when operating.
5. Don’t remove the converter while update is running.
6. Make sure the PC has smooth internet stream

Q : My converter is stuck in purple light(update mode).

A:

1. Redo fimware update again.
2. Disconnect, reconnect and retry fimware update.
3. Contact Brook for further assistance.

Q: I don’t know how to do firmware update, how can I do?

A: There’s firmware update guide for you to download and read.

     You can download it from Brook’s official website.

     Go to “Support è Download”

     Brook’s official website download page: http://www.brookaccessory.com/download/

Q : I have some problem with firmware update.

A : Should you have any problem, please try the troubleshooting methods as below :

1. Disconnect, reconnect and retry
2. Switch another USB port and retry
3. Use another PC and retry
4. Restart PC and retry
5. Restart firmware and retry
6. Use another controller and retry
7. Shorten cable length/Use another cable and retry
8. Make sure you download the correct file
9. If you have installed ZeroPlus Driver before, remove it and retry
10. Disable antivirus and retry
11. Run the program as administrator

     If you have tried all the methods above and your problem still exists, log on to Brook’s official website, go to “Contact us” for assistance.

Q : Do I need to do firmware update if there's new release ?

A : As long as you can use the converter without any problem, you don't have to do firmware update.

Q : What should I pay attention to for firmware update ?

A: 

1. Firmware update must be done on a PC, it cannot be done on a console.
2. Operate it on desktop PC. For laptop, please connect your laptop to power supply.
3. Do it on Windows 7(and above) or Mac.
4. Disable antivirus when operating.
5. Don’t remove the converter while update is running.
6. Make sure the PC has smooth internet stream

Q : My converter is stuck in purple light(update mode).

A:

1. Redo fimware update again.
2. Disconnect, reconnect and retry fimware update.
3. Contact Brook for further assistance.

Q : I try to update the firmware for my converter , It keeps giving me the message

" Downlaod file failed  " and "The remote server returned an error: 227 " ,  What can i do ?

A : 

    Download the offline firmware verssion , then update again.

    FTP :

    http://bd.zeroplus.com.tw:8080/

     Account ID :  rmaguest

     Password : 16265929

Q: I don’t know how to do firmware update, how can I do?

A: There’s firmware update guide for you to download and read.

     You can download it from Brook’s official website.

     Go to “Support è Download”

     Brook’s official website download page: http://www.brookaccessory.com/download/

Q : I have some problem with firmware update.

A : Should you have any problem, please try the troubleshooting methods as below :

1. Disconnect, reconnect and retry
2. Switch another USB port and retry
3. Use another PC and retry
4. Restart PC and retry
5. Restart firmware and retry
6. Use another controller and retry
7. Shorten cable length/Use another cable and retry
8. Make sure you download the correct file
9. If you have installed ZeroPlus Driver before, remove it and retry
10. Disable antivirus and retry
11. Run the program as administrator

     If you have tried all the methods above and your problem still exists, log on to Brook’s official website, go to “Contact us” for assistance.

Q : Do I need to do firmware update if there's new release ?

A : As long as you can use the converter without any problem, you don't have to do firmware update.

Q : What should I pay attention to for firmware update ?

A: 

1. Firmware update must be done on a PC, it cannot be done on a console.
2. Operate it on desktop PC. For laptop, please connect your laptop to power supply.
3. Do it on Windows 7(and above) or Mac.
4. Disable antivirus when operating.
5. Don’t remove the converter while update is running.
6. Make sure the PC has smooth internet stream

Q : My converter is stuck in purple light(update mode).

A:

1. Redo fimware update again.
2. Disconnect, reconnect and retry fimware update.
3. Contact Brook for further assistance.

Q : My Ras1ution 2 used to work perfectly, but now it doesn’t seem to work anymore, it seems to be defective.

A:

1. Please make sure you have followed firmware update guide to do firmware update first.
2. Check if there's any change to your gamimg environment.
3. Make sure the screen can turn on when it is plugged to console/PC.
4. Contact your original place of purchase for assistance.
5. For further assistance, please log on to

Q : My Ras1ution used to work perfectly, but now it doesn’t seem to work anymore, it seems to be defective.

A:

1. Please make sure you have followed firmware update guide to do firmware update first.
2. Check if there's any change to your gamimg environment.
3. Make sure the screen can turn on when it is plugged to console/PC.
4. Contact your original place of purchase for assistance.
5. For further assistance, please log on to Brook's official website, go to“Contact us", and leave your message, we will contact you soon.

Q : My converter used to work perfectly, but now it doesn’t seem to work anymore, it seems to be defective.

A:

1. Please make sure you have followed firmware update guide to do firmware update first.
2. Check if there's any change to your gamimg environment.
3. Make sure the converter LED is on when it is plugged to console/PC.
4. Contact your original place of purchase for assistance.
5. For further assistance, please log on to Brook's official website, go to“Contact us", and leave your message, we will contact you soon.